Restore Hyper-V data: Full VMs, files, or disk files

You can restore Hyper-V VMs as full VMs, guest files, or VM disk files. Full VM restores can return the VM to its original location or an alternate location.

Restore behavior can vary depending on your environment. For example, restoring to a different location might require destination host, folder, and network settings that match the destination environment.

Prerequisites

If the VM is configured with Hyper-V Replica, disable replication on the Hyper-V host before the restore. You can re-enable replication after the restore completes.

Procedure

  1. From the Command Center navigation pane, go to Protect > Virtual machines.

  2. On the VM groups tab, in the row for the VM group, click the action button, and then click Restore.

  3. Click Full virtual machine.

  4. Select the VMs to restore, and then click Restore.

  5. Click In place, leave the default values, and then click Next.

  6. Select the checkbox for the VM, and then click Next.

  7. (Optional) Configure additional settings. For more information, see Common settings for virtual machine protection.

  8. On the Summary page, review the settings.

  9. Click Submit.

  1. From the Command Center navigation pane, go to Protect > Virtual machines.

  2. On the VM groups tab, in the row for the VM group, click the action button, and then click Restore.

  3. Click Full virtual machine.

  4. Select the VMs to restore, and then click Restore.

  5. Select Out of place.

  6. For Restore as, select the destination platform, and then click Next.

    Destination platforms
    • Microsoft Hyper-V: Restore the VM to the same or another Hyper-V environment. This is the most common option.

    • Azure / Amazon Web Services / VMware / Azure Stack Hub / Azure Local: Restore the VM to a different platform. Use this option for migration, disaster recovery, or testing in another environment.

      For cross-platform restore requirements and VM preparation steps, see Prepare your environment.

  7. For Destination client, select the destination client for the platform you selected. For Microsoft Hyper-V, select the destination Hyper-V server or cluster.

  8. For Access node, select Automatic or a specific access node.

  9. Click Next.

  10. Select the VMs to restore and configure the options for the destination platform.

    For Microsoft Hyper-V destinations, configure these options as needed:

    • VM display name: Specify a name for the restored VM.

    • Destination Hyper-V host: Select the host in the destination cluster.

    • Destination folder: Select the folder for the restored VM.

    • Network adapter: Select the network adapter. If the same adapter is available on the destination, it is selected automatically.

    • Disk provisioning: Select Auto, Dynamic, or Fixed. For VHD disks, the provisioning type must match the source.

    • IP address settings: To assign new network settings to the restored VM, click Add and enter the IP address, subnet mask, gateway, and DNS servers. This option is available only for Hyper-V to Hyper-V restores. The source VM must use a static IP address.

    For other destination platforms, configure the destination-specific options displayed in the restore wizard. The Hyper-V options above do not apply.

  11. Click Next.

  12. (Optional) Configure additional settings. For more information, see Common settings for virtual machine protection.

  13. On the Summary page, review the settings.

  14. Click Submit.

Use this option to restore files and folders from a VM backup without restoring the entire VM.

Requirements and limitations

  • Guest file restores require the File System package to be installed inside the guest VM. If you are restoring more than 10 GB or more than 10,000 files, install the package using the Restore only agent setting.

  • For VMs hosted on an SMB share, guest file restores from snapshot backups require configuration before backup. The Collect file details option must be enabled on the VM group before the backup runs. If this was not configured, restore the entire VM or use agent-based file restore.

Procedure

  1. From the Command Center navigation pane, go to Protect > Virtual machines.

  2. On the VM groups tab, in the row for the VM group, click the action button, and then click Restore.

  3. Click Guest files.

  4. Browse or search for the files or folders to restore.

  5. Select the items to restore, and then click Restore.

  6. Select the destination:

    • Restore to the original VM: On the Select client tab, verify that the source VM is selected for Destination client.

    • Restore to a different VM: On the Other VM tab, select the destination hypervisor and VM.

    • Restore to a guest agent or other client: On the Select client tab, select the destination client.

  7. For Destination path, specify the path to restore the files to.

  8. (Optional) Configure additional settings. For more information, see Common settings for virtual machine protection.

  9. Click Submit.

Use this option to restore VHD or VHDX disk files and VM configuration files without importing the VM. The VM is not recreated — only the files are restored to the file system.

  1. From the Command Center navigation pane, go to Protect > Virtual machines.

  2. On the VM groups tab, in the row for the VM group, click the action button, and then click Restore.

  3. Click Virtual machine files.

  4. Select the data to restore, and then click Restore.

  5. On the Restore options page, configure the following:

    • Destination hypervisor: Select the Hyper-V host to restore the files to. By default, files are restored to the original hypervisor.

    • Path: Enter or browse to the destination folder on the Hyper-V host.

  6. (Optional) Configure additional settings. For more information, see Common settings for virtual machine protection.

  7. Click Submit.

×

Loading...